ISO/TS 20065:2022

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ١٩ ديسمبر ٢٠٢٢

Acoustics — Objective method for assessing the audibility of tones in noise — Engineering method

ملفات الوثيقة ISO/TS 20065:2022

الإنجليزية 33 صفحات
الإصدار الحالي
USD 198.98

مجال الوثيقة ISO/TS 20065:2022

This document describes a method for the objective determination of the audibility of tones in environmental noise.

This document is intended to augment the usual method for evaluation on the basis of aural impression, in particular, in cases in which there is no agreement on the degree of the audibility of tones. The method described can be used if the frequency of the tone being evaluated is equal to, or greater than, 50 Hz. In other cases, if the tone frequency is below 50 Hz, or if other types of noise (such as screeching) are captured, then this method cannot replace subjective evaluation.

NOTE      The procedure has not been validated below 50 Hz.

The method presented herein can be used in continuous measurement stations that work automatically.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
YSMO GSO 150-2:2020
GSO 150-2:2013 
لائحة فنية يمنية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
YSMO GSO 2055-1:2020
GSO 2055-1:2015 
مواصفة قياسية يمنية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 5530-1:2026
 
مواصفة قياسية دولية
Wheat flour — Physical characteristics of doughs — Part 1: Determination of water absorption and rheological properties using a farinograph
ISO 22366:2026
 
مواصفة قياسية دولية
Security and resilience — Community resilience — Framework and principles for energy resilience
ISO 7685:2026
 
مواصفة قياسية دولية
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial ring stiffness
ISO/ASTM 52948:2026
 
مواصفة قياسية دولية
Additive manufacturing of metals — Powder bed fusion — Classification of imperfections